Account
Quote
Cart
The Garage: Ford Sound Deadening Projects
The Garage: Ford Sound Deadening Projects
Featured Build: 2006 Mustang GT Sound Deadening
Christian's 2006 Mustang gt
When you have all this horse power, sometimes you've got to tame down the noise level so the ladies can enjoy the ride too. Christian skinned this Mustang with a full layer of Damplifier throughout the trunk and transmission tunnel using about 40 sqft. He then used 20 sqft of Luxury Liner Pro on the trunk floor above the exhaust and 10 sqft above the transmission tunnel. This treatment method reduced the cabin noise levels about 8 dB and completely blocked out the exhaust drone Christian was experiencing. Damplifier Pro + Luxury Liner Pro in the trunk is the easiest way to cut down on exhaust and rear tire noise without treating the entire floor.
This awesome 2006 Mustang GT makes that Second Skin box look real good.
Ripping this bad boy out from top to bottom, before washing the metal with denatured alcohol.
After skinning the Mustang trunk, Damplifier goes on nice and smooth.
That is one sexy looking ghosted logo...Christian did some great work on this 20 sqft box of Damplifier.
Don't forget to do the trunk lid, those things can be really loud. For regular daily drivers like this 25-40% coverage is good. If you have a trunk full of alligators (lol) dropping 140+dB with your BASS, you'll want to bump that coverage up to 80-100% depending on sound pressure levels.
After the trunk, we move up the to the floor and complete the transmission tunnel to stop heat transfer and structure borne noise.
Left rear of the trunk gets the barrier layer Luxury Liner Pro added to block out the tire noise and exhaust drone.
Right rear trunk gets the MLV barrier layer.
When applying barrier and thermal layers make sure to make cuts around wires, bolt holes, etc as small as possible. Avoid creating large gaps in these types of layers for maximum effectiveness.
Make sure to butt pieces of Luxury Liner Pro together as close as possible to avoid sound and heat from making their way through.
View from the back after full installation. Super clean inside with the spare tire and jack still mounted below.
View from the back seat showing spare tire and jack remounted in factory location before applying the Luxury Liner Pro.
It has been a fun project, but it is time to get this bad boy back together and hear the Second Skin difference!!!
Ford Sound Deadening Videos
2017 F250 Sound Deadening
2017 F250 Sound Deadening
More Chevrolet Sound Deadening Projects
1978 Bronco
Type of Project: Full Ford Bronco Sound Deadening on Floor, Doors, Ceiling, & Cargo Area
Products Used: 78 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling/Cargo Floor)
56 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors)
14 Sq Ft of Heat Wave Pro (Ceiling)
Accessories: Spray Adhesive (2 cans), Wooden Roller
2012 Edge Sport
Type of Project: Cabin Floor & Doors
Products Used: 61 Sq Ft of Damplifier Pro Deadener (Floor/Doors)
47 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl (Floor)
19 Sq Ft of OverKill Pro Closed Cell Foam (Front Doors)
Accessories: Spray Adhesive (2 cans), Wooden Hand Roller
2022 BRONCO RAPTOR
Check out this awesome Bronco project from some of the best installers in the business Sound Evolution of Texas. Inside the Bronco the crew has skinned this beast with 90 sqft of Damplifier Pro on the floor, doors, and cargo area. They applied about 54 sqft of Luxury Liner Pro in the cargo area, cabin firewall, and floor. They finished up the outer door skins with 28 sqft of Damplifier Pro and Mega Zorbe. When this tough Bronco is mudding through the trails, all you can hear inside is the sound of the awesoem system they installed as well.
2022 Ford Bronco Raptor at Sound Evolution Texas
All taken apart and ready for the Second Skin treatment.
About 60 sqft of Damplifier Pro throughout the cabin firewall, floor, and cargoa area.
54 sqft of Luxury Liner Pro added to the floor, cabin firewall, and cargo area.
Total of 7 sqft of Damplifier Pro for the inner and outert door skins.
2016 Transit van
Type of Project: Front Doors (Inner and Outer Skins)
Products Used: 40 Sq Ft of Damplifier Pro Deadener (Inner & Outer Door Skins)
Accessories: Wooden Roller
2013 focus
Type of Project: 4 Doors
Products Used: 28 Sq Ft of Damplifier Pro Deadener (Doors)
Accessories: Speaker Tweakers, Wooden Hand Roller
1993 LigHTNing Restoration
The guys at Phoenix Garage Detroit @phoenixgaragedetroit are one step clsoer to completion on their restoration thanks to Spectrum liquid sound deadening throughout the interior. This truck took 2 gallons to fully treat the cab with three 1mm layers. Thanks for choosing Second Skin!
1993 Lightning is treated to kill sound, stop rust, and reduce heat tansfer.
Naked metal screaming for Spectrum sound deadening. Roof and back wall treated.
Spectrum went on smooth. Time to cure overnight.
2005 Escape
Type of Project: Floor & Doors
Products Used: 54 Sq Ft of Damplifier Pro Deadener (Floor/Doors 60% Coverage)
45 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl (Floor)
54 Sq Ft of OverKill Pro Closed Cell Foam (Doors/Cargo Walls/Rear Hatch)
24 Sq Ft of Heat Wave Pro Thermal Jute (Ceiling)
Accessories: Spray Adhesive (3 cans), Wooden Hand Roller
2001 Excursion Diesel
Type of Project: Floor, Doors, & Rear Seat Area
Products Used: 113 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Back Seat Area)
77 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Firewall)
68 Sq Ft of OverKill Pro Closed Cell Foam (Doors/Rear Hatch)
Accessories: Spray Adhesive (4 cans), Wooden Roller
Vanny vidi vici
Hello, my name is Vanny Vidi Vici. I am a 2013 Ford E350 Van and I am spending the second half of my life as a camper van!!! There is a ton of metal that needs treated in this van and I choose Second Skin Spectrum liquid sound deadening for the van. 10 gallons gave me 3 layers of 1mm each to reach a nice 3mm final coverage. After that I applied 180 sqft of Heat Wave Pro.
2013 E350 ready for the Second Skin treatment
Empty van screaming for Spectrum sound deadening.
Spectrum going on nicely.
Getting closer to full coverage, layer by layer.
Three 1mm layers for a nice 3mm finish of Spectrum on the floor, walls,doors, and ceiling.
7 sheets of Heat Wave Pro for the walls, doors, and ceilings for thermal insulation.
1969 falcon wagon
Type of Project: Floor, Doors, and Cargo Area
Products Used: 104 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Cargo Area Floor & Walls/Cargo Hatch)
63 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl (Floor)
42 Sq Ft of OverKill Pro Closed Cell Foam (Doors/Cargo Hatch)
Accessories: Spray Adhesive (4 cans), Wooden Hand Roller
1960 thunderbird
Type of Project: Floor
Products Used: 40 Sq Ft of Damplifier Pro Deadener (Floor)
Accessories: Wooden Roller
Ford van life
Anthony used Second Skin products on his 2022 Ford E350 Van conversion to go from cargo to living life on the road!. He chose to use the Damplifier Pro for his project and used about 250 sqft of it on the floor, doors, side walls, and ceiling. He then applied 2000 sqft of Heat Wave Pro to the walls and ceiling along with 90 sqft of Luxury liner Pro for the floor.
2022 E350 ready for the Second Skin treatment
Anthony is going crazy with all of the sound waves from the cargo area going into the back of his head!
Damplifier Pro going in real nice!
Damplifier Pro full coverage on the side walls.
The satisfcation of peeling the wax paper off each sheet is so fun!
Sheets of Heat Wave Pro going on the walls for thermal insulation and sound absorption.
Side wall application with adhesives and manual fastners.
Anthony's van conversion is all ready for the next stage...bed, bath, and beyond!
2007 Expedition
Type of Project: Full Vehicle
Products Used: 100 Sq Ft of Spectrum Liquid Deadener (Floor/Doors/Cargo)
70 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors)
9 Sq Ft of OverKill Closed Cell Foam (Rear Hatch)
Accessories: Spray Adhesive (3 cans), Spectrum Spray Gun
1933 Factory Five Roadster
Type of Project: Full Vehicle (Factory Five Roadster Kit)
Products Used: 80 Sq Ft of Damplifier Pro Sound Deadener (Floor/Doors/Hood/Trunk)
36 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Trunk)
12 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Foot Box)
Accessories: Spray Adhesive (1 can), HH66 Vinyl Cement, Wooden Roller
1966 Mustang
Type of Project: Floor & Trunk
Products Used: 68 Sq Ft of Damplifier Pro Deadener (Floor/Trunk)
Accessories: Wooden Roller
Mustang
Type of Project: Floor & Trunk
Products Used: 60 Sq Ft of Spectrum Liquid Sound Deadening (Floor/Trunk)
Accessories: Spectrum Spray Gun
1978 King cobra mustang II
This sweet looking 70's era Mustang is full of Second Skin. The customer used 80 sqft of Damplifier Pro on the doors, floor, roof, and trunk. He used 54 sqft of Luxury Liner with 54 sqft of OverKill first on the floor and the trunk. Last, he used 28 sqft of OverKill Pro on the doors and the roof of this Mustang.
1978 Mustang King Cobra II about to get that Second Skin treatment.
Always fun to start in the trunk, 20 sqft of Damplifier for the trunk floor and 5 sqft for the trunk lid.
Moving on into the cabin, that sexy looking black on black SS logo makes this Mustang look real good inside. About 10-12 sqft of Damplifier Pro used in the back seat area.
Driver and passenger seat area received about 15 - 18 sqft of Damplifier Pro to kill the vibration and stop the heat transfer through the transmission hump.
This customer chose to use the 1/8" OverKill as his decoupler between the Damplifier Pro foil and the Luxury Liner vinyl.
One sweet looking Mustang King Cobra II
The customer liked the look of the OverKill so much that he used it on his speaker mounting and other areas..check out his work!!!
That is one nice looking speaker mount #SecondSkinForTheWin
1965 Factory Five Roadster
Type of Project: Full Vehicle
Products Used: 68 Sq Ft of Damplifier Pro Sound Deadener (Floor/Doors/Hood/Trunk)
32 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Trunk)
9 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Foot Box)
Accessories: Spray Adhesive (1 can), Wooden Roller
1964 F100
Type of Project: Floor & Doors Soundproofing
Products Used: 32 Sq Ft of Damplifier Pro Deadener (Floor/Doors)
38 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors)
Accessories: Spray Adhesive (1 can), Wooden Roller
1949 F1 Restoration
The awesome crew at Popeye's Rod Shop in Louisiana with a full Second Skin soundproofing for the @chop1972 1949 Ford F1 restoration thanks to Damplifier Pro sound deadening and Heat Wave Pro jute thermal insulation throughout the interior cab. This truck took 45 sqft of Damplifier Pro and 48 sqft of Heat Wave Pro to fully treat the cabin firewall, floor, back wall, doors, and ceiling.
f250
Type of Project: Doors
Products Used: 20 Sq Ft of Damplifier Pro Sound Deadener (Inner & Outer Door Skins)
Accessories: Wooden Roller
2013 F150
Type of Project: Doors Soundproofing
Products Used: 20 Sq Ft of Damplifier Pro Deadener (Doors)
18 Sq Ft of Mega Zorbe Self Adhesive Melamine Foam (Doors)
Accessories: Wooden Roller
Dante81_98 2014 f250 powerstroke diesel
Arizona customer Dante81_98 utilized the 25-40% checkerboard method perfectly with this F250 build. A typical F250 cabin uses around 80-100 sqft of vibration control product. With the 25-40% method, you can scale back and use less vibration control product for average vehicles (no huge engine/exhaust upgrades or loud bass). For this build Dante used 36 sqft of Damplifier Pro spread out in a checkerboard fashion across the floor, doors, ceiling, and back wall. He then covered up the floor with closed cell foam and mass loaded vinyl .
2014 F250 Power stroke Diesel ready to get some sound deadening.
Floor all cleaned and ready to wash down with denatured alcohol.
The checkerboard 25-40% method performed perfectly, small pieces of Damplifier Pro spread out evenly across the back wall and floor. About 20-25 sqft applied to this area.
40 sqft of closed cell foam applied on top to decouple and provi
Last layer is the Luxury Liner mass laoded vinyl. 40 sqft placed on top of the closed cell foam to form asolid barrier layer to
Ceiling all cleaned off and ready for Damplifier Pro.
Checkerboard method on the ceiling, about 12 sqft of Damplifier Pro used.
2013 f150
Type of Project: Floor
Products Used: 40 Sq Ft of Damplifier Pro Sound Deadener (Floor)
Accessories: Wooden Roller
2013 F150
Type of Project: Door Panel Soundproofing
Products Used: 12 Sq Ft of Damplifier Pro Deadener (Door Panels)
4 Sq Ft of Mega Zorbe Self Adhesive Melamine Foam (Door Panels)
Accessories: Wooden Roller
2020 F450 Limited Dually
What do you do when you get a brand new F450 Dually and you live in Colorado? That's right, you take it to the awesome guys at Colorado Car Audio to get it the absolute best upgrades possible. After installing 100 sqft of Damplifier Pro on the floor, doors, back wall they installed 45 sqft of Luxury Liner Pro on the floor, 24 sqft of Luxury Liner Pro in the doors, and 15 sqft of Luxury Liner Pro on the back wall. The roof got 24 sqft of Damplifier Pro and 32 sqft of Mega Zorbe melamine foam. And don't forget the Speaker Tweakers set of 4, one for each door. After skinning it with Second Skin, Moe and the gang installed treated with a full assortment of JL Audio speakers, amps, and cross overs. This has to be one the coolest 2020 F450's on the road!!! If you are interested in insulating a speaker box, check out our article on the topic.
Justin brought his 2020 F450 Limited Dually to the guys at Colorado Car Audio to get the good treatment.
First up is the doors, skinned with the 40%-60% coverage method. About 6-7 sqft per door skin and panel.
Can't forget to drop those Speaker Tweakers in the doors with some super glue.
And last is the Luxury Liner Pro mass loaded vinyl to block out road and tire noise. Each door used about 6 sqft with all of the bars and mechanisms in the way.
Everything back together and looking good, nice use of the Damplifier Butyl Tape to adhere the vapor barrier back to the door (we always recommend to do that).
After the sound treatment, Colorado Car Audio upgraded this bad boy with all JL Audio speakers and amps.
And you already know, the guys at CCA finish those installs with a clean and sexy look!!!
JL Audio speakers everywhere, even the front dash.
That new Second Skin banner sure does pop in the shop...thanks for insisting on high quality American made Second Skin products for all of your builds.
1997 F150 2 Door
Type of Project: Floor & Back Wall
Products Used: 41 Sq Ft of Damplifier Pro Deadener (Floor/Back Wall)
38 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Back Wall)
Accessories: Spray Adhesive (1 can), Wooden Roller, Fury Knife
2001 F150 Super Crew 4 door
Type of Project: Full Vehicle
Products Used: 85 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling/Back Wall)
70 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Firewall/Doors/Back Wall)
30 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling)
40 Sq Ft of Spectrum Liquid Deadener (Wheel Wells/Cabin Undercarriage)
Accessories: Spray Adhesive (4 cans), Wooden Roller, Spectrum Spray Gun Bundle
1995 F350
Type of Project: Floor & Doors
Products Used: 84 Sq Ft of Damplifier Pro Deadener (Floor/Doors)
54 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor)
30 Sq Ft of Mega Zorbe Melamine Foam (Doors)
Accessories: Spray Adhesive (2 cans), Wooden Roller, Fury Knife
2015 Ford Focus
Type of Project: Full Vehicle
Products Used: 92 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling/Hatch Area)
42 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Hatch Area)
20 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling)
30 Sq Ft of Mega Zorbe Melamine Foam (Doors/Rear Hatch Door)
Accessories: Spray Adhesive (4 cans), Wooden Roller, Spectrum Spray Gun Bundle
2005 Escape
Type of Project: Hood Kit Install
Products Used: 14 Sq Ft of Damplifier Pro Deadener (Hood)
20 Sq Ft of Heat Wave Pro (Hood)
Accessories: Spray Adhesive (1 can), Wooden Roller, Fury Knife, Foil Tape
2019 f350 king ranch
Type of Project: Full Vehicle Install by Colorado Car Audio
Products Used: 92 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling/Back Wall)
55 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Cabin Firewall/Back Wall)
44 Sq Ft of Mega Zorbe Melamine Foam (Doors/Ceiling)
24 Sq Ft of OverKill Closed Cell Foam (Door Panels)
60 Sq Ft of Spectrum Liquid Sound Deadening (Wheel wells & Undercarriage)
Accessories: Spray Adhesive (3 cans), Wooden Roller, Speaker Tweakers
Brandon's 2019 Ford F-350 Super duty
Brandon is doing a major upgrade to his Super Duty. He's got a premium sound system with a sweet box made by Bobby Gately for under the seats that feature (4) Sundown Audio 8" subs. Brandon used 60 sqft of Damplifier Pro throughout the cab of his truck with one layer to keep those vibration noises down.
Brandon's 2019 F-350 Superduty
Step 1: Gut the entire truck cabin and prepare for sound deadening.
Rear seats and wall all stripped.
Step 2: Skin this bad boy with 60 sqft of Damplifier Pro
That ghosted black on black logo looks so clean inside the build.
The back wall of the F350 all skinned in Damplifier Pro.
Step 3: Add the power supply for this awesome stereo upgrade.
Step 4: Install the interior back in.
Step 5: Bring in the BOOM...those Sundown subs look sweet inside of the Gately sub box.
All back together like nothing ever happened and now it's time to enjoy all of that hard work...Turn that bass on!!!
Looking Real Good!!!
2002 F250 Super Duty Crew Cab 4 Door
Type of Project: Full Cab & Undercarriage
Products Used: 70 Sq Ft of Spectrum Deadener (Floor/Doors/Ceiling/Back Wall)
68 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Firewall/Back Wall)
30 Sq Ft of Spectrum Liquid Deadener (Front Wheel Wells/Cabin Undercarriage)
Accessories: Spray Adhesive (3 cans), Double Sided Tape, Spectrum Spray Gun
1965 Falcon station wagon
Type of Project: Floor(Cabin & Cargo), 2 Doors
Products Used: 105 Sq Ft of Damplifier Pro Deadener (Floor/2 Doors)
65 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor)
Accessories: Spray Adhesive (2 cans), Wooden Roller
2001 Focus ZX3
Type of Project: Floor, Doors, & Hood
Products Used: 65 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Hood)
42 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors)
16 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Hood)
Accessories: Spray Adhesive (2 cans), Foil Tape
2005 Focus zx5
Type of Project: Floor, Doors, Ceiling & Hatch Area
Products Used: 70 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling/Hatch)
52 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors)
28 Sq Ft of Mega Zorbe Melamine Foam Sheet (Ceiling/Hatch Walls)
Accessories: Spray Adhesive (1 can), Wooden Roller, Fury Knife
2013 focus se
Type of Project: Full Soundproofing Car Project
Products Used: 84 Sq Ft of Spectrum Deadener (Floor/Doors/Ceiling/Trunk)
40 Sq Ft of Luxury Liner Pro Sound Barrier Material (Cabin Floor)
30 Sq Ft of OverKill Pro Closed Cell Foam (Doors)
Accessories: Spray Adhesive (3 cans), Spectrum Spray Gun
1930 Model A
Type of Project: Full Vehicle Car Soundproofing
Products Used: 56 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling/Hood)
38 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors)
24 Sq Ft of Heat Wave Pro Insulation (Ceiling/Hood)
Accessories: Spray Adhesive (1 can), Wooden Roller, Fury Knife
2014 Mustang GT
Type of Project: Full Vehicle Sound Deadening
Products Used: 72 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Firewall/Ceiling/Trunk)
45 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Firewall/Trunk)
18 Sq Ft of OverKill Pro Closed Cell Foam (Doors)
18 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling)
Accessories: Spray Adhesive (3 cans), Wooden Roller, Foil Tape
2014 Mustang Convertible
Type of Project: Doors & Trunk
Products Used: 42 Sq Ft of Damplifier Pro Deadener (Doors/Trunk)
36 Sq Ft of Luxury Liner Pro Sound Barrier Material (Doors/Trunk)
Accessories: Spray Adhesive (1 can), Wooden Roller
1967 shelby g.t. 500e eleanor build by west coast customs
The amazing crew at West Coast Customs was chosen to build Carlo Boutagy a customized Eleanor Mustang and they knocked it out oft he park. As West Coast Customs go to brand of sound and heat insulation, they called us up and we go them the goods they needed to make this one quiet and cool ride inside. WCC used 70 sqft of Damplifier Pro to skin the floor, doors, trunk, and ceiling of this bad boy and you can see some of it getting laid down in their YouTube video: WCC 1967 Shelby G.T. 500E
An amazing project featuring Second Skin.
Old school rides always have the best interior detail work...so nice.
Check out this swee build by West Coast Customs, you can see the Second Skin being applied at the 8 minute 30 second mark.
1967 Mustang Coupe
Type of Project: Door Sound Deadening
Products Used: 13.5 Sq Ft of Damplifier Pro Deadener (Both Door Skins 60% Coverage)
16 Sq Ft of Luxury Liner Pro Sound Barrier Material (Outer Door Skins)
16 Sq Ft of OverKill Closed Cell Foam (Inner Door Skins)
Accessories: Spray Adhesive (2 cans), Wooden Roller
1970 Mustang Fastback Coupe
Type of Project: Complete Vehicle Soundproofing
Products Used: 87 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Trunk/Cabin Firewall/Ceiling)
49 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Firewall/Trunk)
38 Sq Ft of OverKill Pro Closed Cell Foam (Doors/Trunk Lid)
20 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling)
Accessories: Spray Adhesive (3 cans), Wooden Roller
1993 Mustang Hatchback LX 5.0
Type of Project: Floor, Cabin Firewall, Trunk & Ceiling
Products Used: 72 Sq Ft of Damplifier Pro Deadener (Floor/Firewall/Trunk/Ceiling)
52 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Firewall/Trunk)
22 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling)
Accessories: Spray Adhesive (2 cans), Wooden Roller
2003 Mustang SVT Cobra
Type of Project: Floor, Doors, Hood, Trunk, Firewall & Ceiling
Products Used: 96 Sq Ft of Damplifier Pro Deadener (Floor/Ceiling/Hood/Doors/Firewall/Trunk)
57 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Trunk)
52 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling/Firewall/Hood)
Accessories: Spray Adhesive (4 cans), Wooden Roller, Foil Tape (2 rolls)
2014 econoline 4x4 van
The awesome guys at Colorado Car Audio back at it again with this sweet off road monster. Skinned with 140 sqft of Damplifier Pro (40-60% checker board spread out method) along with 54 sqft of Luxury Liner Pro (Doors/Side Door/Rear Doors). They also installed Kenwood Apple Car Play head unit, (6) Kenwood 6x8 speakers, 13" drop down rear monitor, dual rear cameras to go with the Second Skin products.
Check out their work and schedule an appointment if you are in Colorado.
2015 Econoline 4x4 Van about to get the Second Skin treatment.
First step, tear down.
Installed 6 sqft of Damplifier Pro and Luxury Liner Pro to each the outer door skins.
Next up is the back cargo area to get rid of that tinny sound and echo. 40 sqft of Damplifier Pro was spread out in a checker board fashion using about 25 sqft on each wall and wheel well hump area.
For the floor of the van, they used about 35 sqft of Damplifier Pro spread out in a checker board fashion to cover about 60% of the metal.
The Econoline Van was finished up with a sweet new touch screen dash unit. Nice work guys.
2013 Raptor crew cab
Type of Project: Full Cab Area Sound Deadening
Products Used: 85 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Back Wall/Ceiling)
63 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Back Wall)
24 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling)
Accessories: Spray Adhesive (3 cans), Wooden Roller, Foil Tape, Speaker Tweakers (Set of 4)
1941 Street Rod
Type of Project: Full Cab Soundproofing
Products Used: 42 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Back Wall/Ceiling)
30 Sq Ft of OverKill Closed Cell Foam (Floor/Doors/Back Wall)
30 Sq Ft of Luxury Liner Mass Loaded Vinyl (Floor/Doors/Back Wall)
12 Sq Ft of Heat Wave Pro Jute Thermal Insulation (Ceiling)
Accessories: Spray Adhesive (1 can), HH66 Vinyl Cement (32 oz), Wooden Roller, Foil Tape, Fury Knife
2019 F250 Platinum edition Full Treatment
Team Second Skin Zach W and Jeffrey H with another amazing build with this awesome F250. Sydnee also helped on this project, she did all the amazing door panel work!!! This build used 80 sqft of Damplifier Pro, 63 sqft of Luxury Liner Pro, 24 sqft of Closed Cell Foam, and about 20 feet of Dual Lock Velcro. Check out the detailed cuts and application of products, Jeff's build are always on point. Thanks for always insisting on high quality Second Skin products.
Zach's 2019 Ford F250 Platinum Edition ready for that Second Skin treatment.
Jeffrey laid down about 45 sqft of Damplifier Pro on the floor of this F250 with almost complete coverage. And the checker board method on the doors with about 5 sqft each.
After the Damplifier Pro comes the real work horse, Luxury Liner Pro MLV, to block out those annoying drones, road, engine, and airborne noise. The floor took 36 sqft of Luxury Liner Pro to cover the main areas and leave room for certain center counsel pieces to reattach properly.
The back wall of the F250 was treated with about 15 sqft of Damplifier Pro and 9 sqft of Luxury Liner Pro. Zach utilized the Dual Lock reclosable fasteners for the MLV.
Sydnee rocked these door panels with about 6 sqft of Damplifier Pro in each of the four doors. Zach applied a sheet of Luxury Liner Pro on each outer door skin to complete the door install.
2017 F350 By colorado Car audio
Type of Project: Floor, Doors, & Ceiling
Products Used: 75 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling)
75 Sq Ft of Spectrum Liquid Sound Deadener (On top of the Damplifier Pro Doors/Ceiling/Floor)
63 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl (Floor/Doors)
16 Sq Ft of Mega Zorbe Melamine Foam (Ceiling)
Accessories: Spray Gun, Extra Bottle, Wooden Roller, Foil Tape
1969 ford falcon wagon
Type of Project: Undercarriage
Products Used: 75 Sq Ft of Spectrum Liquid Sound Deadener (Undercarriage (4) 1mm coats)
Accessories: Spray Gun, Extra Bottle
1987 E350 Step Van
Type of Project: Full Van Restoration with the Van Soundproofing Package
Products Used: 228 Sq Ft of Damplifier Pro Deadener (Complete Floor/Doors/Rear Walls/Ceiling)
155 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Rear Wall)
68 Sq Ft of Mega Zorbe Melamine Foam (Ceiling, Added 3 Extra Sheets)
Accessories: Spray Adhesive (5 cans), Wooden Roller, Fury Knife
2010 Mustang GT with NOS & Twin Turbos
Type of Project: Floor, Doors, Roof & Trunk
Products Used: 95 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Roof/Trunk Floor)
65 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Trunk Floor)
Accessories: Spray Adhesive (2 cans), Wooden Roller, Fury Knife
1980 Bronco
Type of Project: Full undercarriage Insulation
Products Used: 60 Sq Ft of Spectrum Liquid Sound Deadener (Undercarriage)
Accessories: Spray Gun + Bottle
2010 F150
Type of Project: Cabin Undercarriage
Products Used: 30 Sq Ft of Spectrum Liquid Sound Deadener (Cabin Undercarriage)
Accessories: Spray Gun + Bottle
Let the good times roll in the building of this 1965 Ford Cobra project by Cody and Kip at Tophat Automotive Syndicate. Based in Evansdale, Iowa, Tophat is the #1 Second Skin authorized dealer in Iowa.
The bare skin of this beauty is all washed up with denatured alcohol and ready for that Second Skin love. Time to add 36 sqft of American made Damplifier Pro.
WOW, what a difference the Second Skin makes! Solid panels, no resonance, and that ghosted black on black logo looks sexy on any build!!!
Take a look at the foot box. No more rattles, no more heat. Nice and sleek looking too. :)
After skinning her with Damplifier Pro, it's time to roll out into the sun and take a test drive. It's the best way to hear that Second Skin difference.
Ohhh, the sparkle!
That is one clean looking Cobra build. Thanks Tophat - keep being awesome!