Dome Cap for Stick Pins (7/8" Diameter)

Dome Cap for Stick Pins (7/8" Diameter)

Use these easy-to-install dome caps with self-locking washers to cover the point of your stick pin for a more seamless install. Made in the USA!

*dome caps should be used aesthetically only and are not designed to hold insulation in place without other securing methods 

Specs

Installation Instructions

1. Apply Adhesive – Spread a thin layer of pin adhesive on the back of the perforated base.
2. Press in Place – Firmly press the base against the wall or ceiling until adhesive comes through the perforations.
3. Mount Insulation – Pierce insulation onto the pin so it sits flush against the surface.
4. Lock & Trim – Slide on the self-locking washer and then trim the excess length. 
5. Install Dome Caps – Cap the pin with dome caps after trimming the excess length.