Nick Cannon's West Coast Customs Tundra Build Package

This Tundra build was featured on West Coast Customer! Go check out Nick Cannon's Custom 2020 Toyota Tundra episode on the West Coast Customs YouTube channel.

• 1 Shop Pack of Damplifier Pro - 80 Sq Ft (48 sheets, 12" x 20" each) - Apply to floor, doors, engine side firewall, back wall, and ceiling. If you have any left over, use it under the inner door skin and pillars. Make your life easier by using a Wooden Hand Roller.
• 5 Sheets of Luxury Liner Pro - 45 Sq Ft (5 sheets, 24" x 54" each) - Apply MLV for a vehicle to the floor, cabin side firewall, and back wall. You MUST cover these areas and transmission hump with as few seams as possible. These are the loudest and hottest part of your Tacoma.
• 10 Sheets of Mega Zorbe - 32 Sq Ft (8 sheets, 24" x 24" x 1/2" each) - Apply Mega Zorbe to the outer door skins and ceiling on top of the Damplifier Pro. Mega Zorbe is self-adhesive and very sticky.
• 1 Spectrum Gallon - 20 Sq Ft (1 Gallon) - Apply to the front exterior wheel wells directly on the metal in between wheels and the cab. Apply (2-3) 1mm coats for best reduction of tire/road noise.

• 1 Shop Pack of Damplifier Pro - 80 Sq Ft (48 sheets, 12" x 20" each) - Apply to floor, doors, engine side firewall, back wall, and ceiling.
• 1 Trunk Pack of Damplifier Pro - 20 Sq Ft (12 sheets, 12" x 20" each) - Apply to the extra doors. If you have any left over, use it under the inner door skin and pillars. Make your life easier by using a Wooden Hand Roller.
• 6 Sheets of Luxury Liner Pro - 54 Sq Ft (6 sheets, 24" x 54" each) - Apply MLV for a vehicle to the floor, cabin side firewall, and back wall. You MUST cover these areas and transmission hump with as few seams as possible. These are the loudest and hottest part of your Tacoma.
• 12 Sheets of Mega Zorbe - 40 Sq Ft (10 sheets, 24" x 24" x 1/2" each) - Apply Mega Zorbe to the outer door skins and ceiling on top of the Damplifier Pro. Mega Zorbe is self-adhesive and very sticky.
• 1 Spectrum Gallon - 20 Sq Ft (1 Gallon) - Apply to the front exterior wheel wells directly on the metal in between wheels and the cab. Apply (2-3) 1mm coats for best reduction of tire/road noise.