Kip of Tophat Automotive Syndicate with another bad ass build for Mr. Jimmy Smooth on this old school Chevy Rat Rod! The floor took about 12 sq ft of Damplifier Pro, the back wall used about 8 sq ft, the doors used 10 sq ft total, and the roof was another 8 sq ft for a total of around 40 sqft of Damplifier Pro butyl mats along with 6 sheets of Thermal Block on the firewall side to reduce the interior floor/firewall temps from above 135 degrees F down to a much more enjoyable 75-80 degrees.
KMR Jimmy Smooth's 1948 Chevy C.O.E.
1948 Chevy C.O.E. install by Kip L member of the Midwest Grease Kings and owner of Tophat Automotive Syndicate.
Damplifier Pro on the floor, firewall, doors, and ceiling.
Damplifier Pro's 450 degree F heat rating and superior adhesion allows for easy install on roofs, hoods, and trunk lids with no fear of fallin
Kip admires his work after a full install of Second Skin.
