BlocknZorbe™ EZ Drop Ceiling Tiles

Product Information

• Semi-rigid, porous expanded polypropylene tiles are the only ceiling tiles to both BLOCK and ABSORB noise
• EZ Drop the BlocknZorbe acoustical ceiling lay in tile
• Lightweight and non-fibrous (no fiberglass)
• Water resistant, impact resistant, and tack-able
• Class A Fire Rated
• Easy to install and easy to clean
• Proudly made in the USA 

Specs

• Size: 23.75" x 23.75" (23.75" x 47.75" available via phone)
• Weight: 1 lb (1"), 2 lbs (2")
• Thickness: 1" or 2"
• Edge: Square
• Colors: Charcoal, White
• BlocknZorbe Product Sheet

Product Uses

• Nominal sized to easily fit into a ceiling grid for a soundproof drop ceiling (full size BlocknZorbe also available)
• Can be direct mounted to walls or ceilings
• Offices, swimming pools, skating rinks, dog kennels, car washes, gun ranges, rooftop and machine enclosures, offices, gymnasiums, auditoriums, schools, classrooms, locker rooms, cafeterias, restaurants, manufacturing plants, and warehouses 

Installation Instructions

• Install the ceiling grid according to building codes and relevant standards
• BlocknZorbe EZ Drop Ceiling tiles should be placed in the grid so that the edges sit on the T-grid flanges, with the face of the tile sitting at or below the grid plane.
• If field cuts are needed, use a table saw. Set blade to cut half the thickness of the BlocknZorbe tile. (i.e. for a 2" thick panel, cut 1" and then flip the panel over and cut 1" again to complete the cut)

Contact us if you have questions!

Noise Reduction Coefficient

Sound Transmission Loss