Arizona customer Dante81_98 utilized the 25-40% checkerboard method perfectly with this F250 build. A typical F250 cabin uses around 80-100 sqft of vibration control product. With the 25-40% method, you can scale back and use less vibration control product for average vehicles (no huge engine/exhaust upgrades or loud bass). For this build Dante used 36 sqft of Damplifier Pro spread out in a checkerboard fashion across the floor, doors, ceiling, and back wall. He then covered up the floor with closed cell foam and mass loaded vinyl.
Dante81\_98 2014 F250 Powerstroke Diesel
Floor all cleaned and ready to wash down with denatured alcohol.
2014 F250 Power stroke Diesel ready to get some sound deadening.
The checkerboard 25-40% method performed perfectly, small pieces of Damplifier Pro spread out evenly across the back wall and floor. About 20-25 sqft applied to this area.
40 sqft of closed cell foam applied on top to decouple and provi
Last layer is the Luxury Liner mass laoded vinyl. 40 sqft placed on top of the closed cell foam to form asolid barrier layer to
Ceiling all cleaned off and ready for Damplifier Pro.
Checkerboard method on the ceiling, about 12 sqft of Damplifier Pro used.
