2008 Yamaha Sx 23' Twin 4 Stroke
Type of Project: Engine Cover & Under Seats Products Used: 54 Sq Ft of Damplifier Pro Deadener 50 Sq Ft of Mega Block Hydrophobic Melamine Foam Insulation Accessories: Wooden Roller, Foil Tape
Read moreCustomer Builds: Boat Sound Deadening Projects
2015 Master Craft
Type of Project: Engine Cover Boat Soundproofing Kit Products Used: 25 Sq Ft of Damplifier Pro Deadener 25 Sq Ft of Heat Wave Pro Jute Thermal Insulation Accessories: Spray Adhesive (1 can), Wooden Roller, Foil Tape
Read more
Wesley's Boat Engine Hatch
This project utilized the Damplifier Pro + Heat Wave Pro in the 36 sqft kit. Started by cleaning off all the old failing factory foam. Then applied the Damplifier Pro with the roller. Next he sprayed on the Spray Adhesive to the Heat Wave Pro and the top of the Damplifier Pro to adhere the Heat Wave Pro. Finally, tape up the seams and edges with the foil tape. Boat is now quieter and cooler. Second Skin Skin knows how to insulate a boat engine.
Read more
2020 Yamaha Jet Boat
Adam covered the engine door with the Second Skin Dampener, then the Heat Wave Pro, then put the original foam back in (cause why not). Everywhere else inside the engine bay he used the Damplifier Pro. Adam also covered the fuel compartment door with the Damplifier Pro which was 9 sqft. It's much quieter than before at idle/sunset cruise speeds making it easier to talk. And quieter when accelerating and at plane speeds. So all around it was worth the investment. Adam really liked that Second Skin is a reputable commercial brand, is rated to hold up to high temps, made in America, will act as a fire retardant, AND the great customer service. dB changes below. BEFORE - 02 mph - 61 db 05 mph 2300 RPM - 69 db 12 mph 4800 RPM - 83 db 20 mph 5300 RPM - 85 db 25 mph 5500 RPM - 93 db AFTER - 02 mph - 59 db 05 mph 2300 RPM - 64 db 10 mph 4200 RPM - 78 db 20 mph 5100 RPM - 81 db 30 mph 5500 RPM - 83 db Final look with the Second Skin Boat Kit along with the factory foam added back on.
Read more
MIKE'S ski boat
This boat engine cover remodeling project was done by Mike and his son over the winter of 2016! Their goal was to remove the old factory insulation that was falling off and replace it with some new high-quality Amertican-made Second Skin sound and heat insulation. Check out these awesome before, during, and after pics submitted by Mike.
Read moreNo articles found for this topic.