Motor Mat Pro is our best thermal acoustic hood liner. Unlike regular Motor Mat which is made with an open celled foam, Motor Mat Pro is made of a closed cell foam which yields much better noise and heat damping results. After you apply a layer of Damplifier or Spectrum on your cars hood, Motor Mat will get applied to block the transmission of unwanted engine noise.
Motor Mat Pro is designed to reduce airborne noise within the engine compartment of automobiles. For best results Motor Mat Pro should be applied on top of a vibration damper such as Damplifier, Damplifier Pro or Spectrum.
When used in this sequence, Motor Mat Pro will block and filter unwanted airborne engine noise, helping to make your interior noise levels much lower.
*Separate adhesive is required
Use On:
Hood, Firewall, Transmission Tunnel, Above Exhaust
Specifications:
Thickness .375 in
Mass/Area .138 lbs/Sq.Ft.
Heat Tolerance 212 °F
Sheets Size 24" X 54"
*Separate adhesive is required
The quieter the cars cabin can be made, the louder and cleaner the cars audio system will sound.
Use Motor Mat Pro to reduce unwanted engine noise and get better sound from your cars audio system!
For best results Motor Mat should be applied on top of a vibration damper such as Damplifier, Damplifier Pro or Spectrum.
*Separate adhesive is required
Use On:
Hood, Firewall, Transmission Tunnel, Above Exhaust
Specifications:
Thickness .375 in
Mass/Area .138 lbs/Sq.Ft.
Heat Tolerance 212 °F
Sheets Size 24" X 54"
*Separate adhesive is required
Motor Mat is a high thermal acoustic barrier made of acoustic grade open celled foam treated with aluminum an facing reinforced with fiberglass cross-threads.
Motor Mat is designed to reflect radiant heat from the engine, transmission and exhaust while dissipating airborne sound waves. Apply Motor Mat to the engine side of the firewall or hood to reflect heat and noise away from the cabin of the car and reduce engine noise inside the vehicle.
For best results Motor Mat should be applied on top of a vibration damper such as Damplifier, Damplifier Pro or Spectrum.
Use On:
Hood, Firewall, Transmission Tunnel, Above Exhaust
Specifications:
Thickness .375 in
Mass/Area .138 lbs/Sq.Ft.
Heat Tolerance 212 °F
Sheets Size 24" X 54"
*Separate adhesive is required
|
