Heat Wave Pro is identical to regular Heat Wave, with one major exception; Heat Wave Pro has a reinforced foil facing laminated to both sides for extra thermal protection. The extra layer of foil insures the most available heat reduction and insulation available from any product of its type. This thermal-acoustic barrier is perfect for reducing heat and noise generated from vehicle engines and exhaust systems. Apply it on top of Damplifier, Damplifier Pro, or our ceramic coating Firewall, for the ultimate in thermal insulation and heat dissipation.
Heat Wave Pro is a very versitile product. When applied on top of a vibration damper like Damplifier Pro, or Spectrum it will filter out sound waves that are able to penitrate their way in to the cabin of your car. Perfect for an inexpensive way to reduce road noise, engine noise and exhaust system drone.
Specifications:
Thickness .375 in (9.52 mm)
Sheets Size 24" x 54" (60.96 cm x 137.16)
Weight 3.2 oz. psf +/- .5oz
Apply a layer of Heat Wave Pro on top of your Damplifier, Damplifier Pro or Spectrum vibration dampers to reduce the unwanted ambient noise in your car. Once you have quieted down the road, engine and exhaust system noise, your stereo volume will sound louder, clearer and less distorted
Specifications:
Thickness .375 in (9.52 mm)
Sheets Size 24" x 54" (60.96 cm x 137.16)
Weight 3.2 oz. psf +/- .5oz
Heat Wave Pro is an amazing insulation blanket and radiant barrier.
The 2 layers of foil reflect radiant heat while the natural fibers reduce convectional heat and insulate your car from extreme temperatures. Adding a layer of Heat Wave Pro on top of Damplifier, Damplifier Pro or Firewall is the easiest way to create a cool and comfortable ride.
Specifications:
Thickness .375 in (9.52 mm)
Sheets Size 24" x 54" (60.96 cm x 137.16)
Weight 3.2 oz. psf +/- .5oz
Q. What makes Heat Wave Pro different from regular Heat Wave?
A. Heat Wave Pro is the same thickness as our regular thermal insulator regular Heat wave, but has a layer of foil on both sides. This extra layer of foil is reinforced with nylon cross threads making it very strong. The thermal damping rating is increase by about 35% and a small amount of noise reduction is increased as well.
Q. Does Heat Wave Pro have an adhesive liner?
A. Adding a layer of pressure sensitive adhesive to this product almost doubles the cost. Instead, we offer a high tack, high temperature contact adhesive in a spray can.
|
